Slick Fab
My Account
Shopping Cart 0 item(s)
View Cart
Home > Brakes

Brembo Big Brake Upgrades

Part Number 28
review 0 Review(s)
Brembo Big Brake Upgrades
Email a friend Email a friend
Review this item Review this item
Your Price:  
In Stock.
Choose Options
Powder Coating
Decals (only available with powder coating option selected) help
Wheel Spacers (required for OEM Wheels)
Speed Bleeders (One way Bleeder valves, allows one person system bleeding)
Rotor Hat Powder Coating
Brake Fluid
Stainless Steel Brake Lines
12.3" Rear Rotor Upgrade (08-17 Accord only)
Hardware/Installation Kit
Direct Bolt On Genuine Brembo Calipers.

These Genuine Brembo Calipers will bolt directly to the following without any brackets or modifications:

1998-2020 Accord (1998-2002 V6 5 Lug only)
2005-2020 Civic (non Type R)
2001-2006 RSX Including Type S
2000-2003 Acura TL/CL including Type S

They are freshly rebuilt using genuine components. Standard Calipers with no powder coating option selected will come in the original Brembo Factory Red and may have small blemishes, but are fully cleaned and all seals/boots/hardware are replaced, ready to install. 

*Special rotors and rotor centering rings are required (can be added below).  Wheel spacers of 20mm minimum thickness are required if you have OEM wheels. 18" min wheels recommended as 17" barrels get within 2mm of caliper or contact it, which is too close in our opinion.*

*We can't guarantee fitment for your particular wheel size/spacer unless we've physically tried a certain wheel/spacer combination in the past. We can however say that the Brembo Calipers stick outwards (towards the wheel spokes)  28mm or 1.1"  farther than the OEM caliper at the point closest to the wheel spokes. You can use this measurement to quickly approximate fitment for your setup with a tape measure*

Powder coating is optional, select from standard colors (Red, Black, Blue, White, Yellow) or pick your own along with a custom logo for a customized unique appearance! ALL of our powder coat colors are two stage and custom candy colors are three stage...others will have a clear coat as an extra charge, we believe clear is required for an extra durable finish especially on things like calipers. 

Optional Logos are only available with powder coating option.

As with all Slickfab products, a full OEM installation parts kit is included with all caliper orders ($45 value). This includes new Banjo Bolts, Crush Washers, and Caliper Mounting Bolts. While reusing the old hardware might be possible, we find that brake hardware can strip easily which would land you at the parts store in the middle of a brake installation, which everyone hates! The included new hardware should prevent any unneeded trips to the store as well as prevent any leaks from attempting to reuse old crush washers. 

Please allow 1 week processing for all BBK orders.